How to read a temperature and salinity profile Image: Olivier Dugornay (CC BY 4.0)

How to read a temperature and salinity profile

Hand an oceanographer a sheet of paper with a wobbly line on it and the first thing they do is turn it so that depth goes down. A profile is temperature, or salinity, or anything else, plotted against depth with the sea surface at the top of the page and the seafloor at the bottom, so that the picture is a slice through the water. Reading one is a skill, and like reading a map it is mostly a matter of knowing what to expect. Here is what to expect, with numbers from the open ocean near Bermuda, where a research ship has measured the same spot every month since 1988 for the Bermuda Atlantic Time-series Study.

The axes

Depth is usually given as pressure in decibars, because that is what the instrument measures; one decibar is almost exactly one metre of seawater, and the difference is less than one per cent down to 2,000 m. Temperature is in degrees Celsius. Salinity is a number without a unit of measurement, typically between 33 and 37 in the open ocean, which stands for about that many grams of dissolved salt per kilogram of seawater; a salinity of 35 means about 35 g/kg. Check the scale of the depth axis before anything else. A profile to 200 m and a profile to 4,000 m of the same water look like different oceans.

The top: the mixed layer

The temperature line starts at the surface with a vertical segment: the same temperature from the surface down to some depth. This is the mixed layer, stirred by the wind and by the cooling of the surface at night, so that its water is uniform. At Bermuda in August it is about 28 °C and only 10 to 20 m thick, because the summer sun warms the surface faster than the light winds can mix the heat down. In March the surface has cooled to about 19 °C, the winter storms have stirred the water, and the mixed layer reaches 150 to 250 m. The depth of the mixed layer is the first number to read off a profile, and its seasonal cycle is the ocean breathing.

The bend: the thermocline

Below the mixed layer the line bends and falls to the left: the temperature drops quickly with depth. This is the thermocline. In summer there are two. The seasonal thermocline, just under the shallow summer mixed layer, is where the temperature falls from 28 °C to about 20 °C in the top hundred metres, and it is erased every winter when the mixing reaches it. Below about 200 m at Bermuda the line passes through a thick layer at 17 to 18 °C where it barely changes, a thermostad called Eighteen Degree Water, formed in the winter mixed layer of the Sargasso Sea and spread out beneath the summer warmth. Then the permanent thermocline begins, and from about 400 m to 1,000 m the temperature falls from 17 °C to about 5 °C. This one is there all year, and it is the boundary between the warm upper ocean that the wind drives and the cold deep ocean that the poles fill.

The bottom: the deep water

From 1,000 m down the line straightens and tilts only slightly: 4 °C at 1,500 m, 3 °C at 2,500 m, about 2.3 °C at 4,000 m. This water did not get cold here. It sank in the Labrador Sea and the Nordic Seas and has flowed south for decades to arrive under Bermuda, and its temperature tells you where it came from. Almost all of the ocean's volume is in this range; the mean temperature of the whole ocean is about 3.5 °C, and the warm surface layer that most people picture is a thin lid.

One correction matters here. A water sample brought up from 4,000 m warms by about 0.4 °C on the way, not from the surroundings but because it expands as the pressure drops. Oceanographers remove this effect and quote potential temperature, written \(\theta\), the temperature the water would have at the surface. At 4,000 m the in-situ temperature might be 2.7 °C and the potential temperature 2.3 °C. Deep profiles are plotted in \(\theta\), and the label on the axis tells you which it is.

The salinity line

Salinity at Bermuda starts at about 36.5 at the surface, high because the subtropics evaporate more water than they get as rain, and the salt is left behind. It rises slightly to a maximum of about 36.7 at 100 to 150 m, where the saltiest surface water of the gyre has been pushed down, then falls through the thermocline to a minimum of about 34.9 near 900 m. That minimum is a fingerprint: it is Antarctic Intermediate Water, formed near 50° S, fresh because it comes from a rainy latitude, and traced by its low salinity all the way into the North Atlantic. Below it the salinity rises again to about 35.0 in the North Atlantic Deep Water, which is salty for deep water because some of it came through the Mediterranean outflow. The layer of fast salinity change is the halocline; at Bermuda it coincides with the thermocline, but in the Arctic, where the surface is fresh and cold over warmer, saltier Atlantic water, the halocline exists where the thermocline runs the wrong way.

Putting the two together

Density depends on both temperature and salinity, and the layer where density changes fastest, the pycnocline, is what makes the ocean stable: light water over heavy water does not mix without work. A rough rule is that a change of 1 °C in temperature changes the density by about the same amount as a change of 0.25 in salinity, with the temperature effect weaker in cold water. At Bermuda the thermocline carries the density; near the poles, where the water is close to freezing and temperature hardly matters, the halocline does.

Oceanographers plot temperature against salinity, with density contours drawn across the diagram, and a profile becomes a curve on which each water mass is a point or a kink. The Bermuda curve runs from 28 °C and 36.5 at the surface down through the Eighteen Degree Water, hooks round the salinity minimum of the Antarctic Intermediate Water, and ends near 2 °C and 34.9 at the bottom. Once you have seen that hook you will recognise it in any Atlantic profile south of 40° N.

To practise, open the Euro-Argo fleet monitoring page, find a float near Bermuda, and open its latest profile. Find the mixed layer, the two thermoclines, the 18 °C thermostad, and the salinity minimum, then do the same with a float in the Weddell Sea and notice that nothing is where you left it.

Unit 3 of the Ocean Masterclass explains what salinity is and how it is measured, derives potential temperature and the equation of state, and uses the Bermuda profiles in summer and winter as its worked examples, with an interactive profile reader. Unit 1 introduces the three kinds of pictures of the ocean. The full list of units is in the curriculum.

Study the ocean properly

The Ocean Masterclass: weekly units, quizzes, a final exam, and a certificate.
About the program
Keep reading

Related articles