The research icebreaker Polarstern in the dark of the Arctic winter, its floodlights lighting blowing snow during the MOSAiC expedition
Unit 08 · All masterclasses · 65 min

The Global Overturning Circulation

Where the deep water forms, how it spreads, and what brings it back to the surface
Image: Alfred Wegener Institute, S. Hendricks, CC BY-SA 3.0 IGO

In a few small regions near the poles, surface water becomes dense enough to sink to the bottom and begin a journey of about a thousand years. This unit follows the water masses on a temperature-salinity diagram and in a section down the Atlantic, dates them with oxygen, chlorofluorocarbons, and radiocarbon, explains what brings the deep water back up, and shows how the Atlantic overturning and its heat transport are measured across a whole basin.

Preview: the beginning of the unit

Somewhere south of Greenland, on a night in February, the wind takes so much heat out of the sea surface that a patch of water a few kilometres across becomes heavier than everything beneath it and falls, slowly, two kilometres down. The water that sinks there will be found decades later at 3,000 m off Brazil, centuries later in the Southern Ocean, and about a thousand years later near the surface of the North Pacific, carrying the oxygen it breathed in that night, the salt of the North Atlantic, and a share of the carbon dioxide of our century. This unit follows it: where seawater becomes dense enough to sink, how the deep water masses are told apart and dated, what brings the water back up, how the overturning of a whole basin is measured, and how much heat it moves. It also closes the Foundation masterclass, because the overturning is where the salt, the heat, the winds, the waves, and the carbon of Units 1 to 7 meet in one picture.

1 Where the deep water is made

Unit 3 established that the density of seawater is set by temperature and salinity, that the density of cold water depends far more on its salinity than on its temperature, and that water denser than its surroundings sinks. Three things can make surface water denser: cooling, evaporation, and the freezing of sea ice, which leaves most of the salt behind in the water. All three happen everywhere, but only in a few places near the poles do they make water dense enough to reach the bottom of the ocean.

1.1 Cooling, evaporation, and brine

Cooling is the main way of making deep water in the North Atlantic. In the Labrador Sea between Greenland and Canada, in the Irminger Sea east of Greenland, and in the Greenland, Iceland, and Norwegian Seas (together the Nordic Seas), the surface water in winter is salty, about 34.9, because it arrived with the Gulf Stream and the North Atlantic Current from the subtropics (Unit 5), and on the way it has already been cooled to 3 or 4 ° C. A winter storm with air at \(-20\) ° C takes several hundred watts out of every square metre of such water, which is more than the roughly 170 W that the Sun delivers to a square metre of the Earth’s surface when averaged over day, night, and the whole year, and in the polar winter almost nothing comes back. After a few days the cooled surface layer is as dense as the water a kilometre down, and it sinks in narrow plumes that stir a region tens of kilometres wide into one uniform column. This process is called deep convection; in the Labrador Sea it reached below 2,000 m in the harsh winters of the early 1990s. Its product, Labrador Sea Water at about 3 ° C and 34.85, spreads out at 1,500 to 2,000 m and forms the upper part of the North Atlantic Deep Water of Section 2.

Evaporation makes dense water where the air is dry and the sea is enclosed. The Mediterranean loses between half a metre and a metre of water a year more by evaporation than it receives from rain and rivers, its surface salinity rises above 38, and in winter its cooled, salty water sinks to the bottom of its basins and leaves through the Strait of Gibraltar at 13 ° C and 38.4. Unit 3 showed why it does not reach the bottom of the Atlantic: it is so warm that after mixing with Atlantic water on its way down the slope it settles at about 1,000 m. Evaporation on its own makes intermediate water rather than bottom water.

Brine rejection is the third way, and it makes the densest water on Earth. When seawater freezes, the ice crystals are made of nearly pure water, and most of the salt is expelled into the water just below the ice. New sea ice has a salinity of only 5 to 10, while the seawater it froze from had about 34, so for every tonne of ice that forms, about 25 kg of salt are pushed into the water underneath. On the shallow continental shelves around Antarctica, above all in the Weddell Sea and the Ross Sea, the winter winds blow the new ice away from the coast as fast as it forms, so that an area of open water called a polynya keeps freezing all winter and keeps dumping salt into the same shelf water, which reaches salinities of 34.7 or more at its freezing point of \(-1.9\) ° C. This shelf water pours down the continental slope, mixes with the deep water it passes through, and arrives at the bottom of the Weddell Sea at about \(-0.8\) ° C as the densest water of the world ocean, the beginning of Antarctic Bottom Water.

The full unit is part of the program

Want to see a complete unit first? Unit 5, Wind-Driven Currents and the Great Gyres, is free to read.